Car Park Products

No Parking Sign

Slo-Motion Standard, modular steel speed control system

Slo-Motion is a modular steel speed control system consisting of truly independent super strong steel modules. The ends of each speed hump are finished off with a pair of end caps. These rounded end caps are moulded from an extremely durable rubber. Suitable for car parks, shopping centres or factory complexes.

Features

  • Designed to comply with AS2890.1-2004.
  • Five year structural guarantee (conditions apply).
  • More than 4 times the load bearing contact area with theroad surface than competitive products.
  • Can be used with or without end caps.
  • End caps cost approximately 1/3 the price of competitors.
  • Comes complete with all fixings.
  • Truly independent modules for easy removal.
  • Does not require a rubber underlay to prevent rattle.
  • Concealed fixings remain accessible.
  • Modules have a built in bridge design to accommodate hoses or cables.

Specifications

Length: 1 metre or 1/2 metre.
Width: 350mm.
Height: 52mm.
Top skin: 3mm floor plate.
No. of fixing: 4 (supplied).
Weight: 17 Kgs. (9.2 Kgs for 1/2 metre).

Part No / Description

SM1000: 1 metre standard duty
SM500: 1/2 metre standard duty
SMEC: 1 pair of end caps

Back to top

Slo-Motion Heavy, seriously heavy vehicle applications

Slo-Motion Heavy is the modular steel speed control system for seriously heavy vehicle applications (including B Doubles). Perfectly suited to transport depots, factories and terminals etc. Our super strong chassis construction with 6mm floor plate and 6 bolt fixing make our Slo-Motion Heavy virtually indestructible.

Features

  • Designed to comply with AS2890.1-2004.
  • Five year structural guarantee*. (*conditions apply)
  • Use with or without end caps.
  • End caps cost less than 1/3 the price of competitors.
  • Comes complete with all fixings.
  • Truly independent modules for easy removal without disturbing adjacent modules.
  • Does not require a rubber underlay to prevent rattles.
  • Concealed fixings remain accessible.
  • Modules have a built-in bridge design to accommodate cables or hoses.
  • More than 4 times the load bearing contact area with the road surface than competitive products

Specifications

Length: 1 metre only.
Width: 350mm.
Height: 55mm.
Top skin: 6mm floor plate.
No. of fixing: 6 (supplied).
Weight: 22Kgs.

Part No / Description

SM1000HD: 1 metre Heavy duty
SMEC: 1 pair of end caps

Back to top

SMR, solid natural rubber speed hump

SMR is a modular speed control system consisting of 500mm body and end sections. The modules are manufactured from high quality, natural rubber and come in either yellow or black. When laid in an alternating pattern they meet the Australian Standards for colour, height, shape and ramp angle. Suitable for car parks, schools, shopping centres or factory complexes.

Features

  • Designed to comply with AS2890.1-1993.
  • Full load bearing contact area with road surface.
  • Convenient 500mm modules in black or yellow.
  • Each module comes complete with 4 fixings.
  • Truly independent modules for easy removal.
  • Concealed fixings remain accessible.
  • Built-in bridge design to accommodate cables or hoses.
  • Rubber construction conforms to uneven surfaces.
  • Solid colour won’t chip or wear.
  • Non-slip surface moulded into each module.
  • Highly shock absorbent rubber is both quiet and smooth in operation.

Specifications

Length: 500mm (both body & end modules).
Width: 400mm.
Height: 60mm.
Material: Solid natural rubber.
Finish: Solid colour (black or yellow).
No. of Fixings: 4 per 500mm module (supplied).
Weight: 10.5 kgs per module

Part No / Description

SMR500Y: 500mm Body module - Yellow
SMR500B: 500mm Body module - Black
SMRE500Y: 500mm End module - Yellow
SMRE500B: 500mm End module - Black

Back to top

Plastic speed hump

Suitable for car parks, shopping centres and factory complexes. These durable speed humps are manufactured from recycled plastic. This construction offers a degree of flexibility which allows the speed hump to conform to uneven road surfaces. An alternative use is for fixing to walls or columns in car parks and loading docks for bumper protection from moving vehicles. Another use for these modules is as a form of spillage containment around liquid storage tanks or redirecting run-off water from driveways, etc. away from open roller doors. The solid construction means these speed humps can handle traffic without chipping or rusting. Available in grey or yellow finish. Each speed hump comes complete with all fixings.

Features

  • Can be fixed to concrete or asphalt.
  • Solid moulded construction.
  • Recycled plastic won’t chip or corrode.
  • Mounting holes moulded in.
  • Handy 1.5 metre modules.
  • Flexible nature allows for curvature in the road surface.
  • Economical and simple to install.
  • Can easily removed or repositioned at any time.
  • Can be used with Slo-Motion end caps.
  • Comes complete with fixings.

Specifications

Description: Modular speed control system.
Material: Recycled plastic.
Finish: Solid colour with non-slip surface.
Length: 1515mm.
Width: 380mm.
Height: 60mm.
Installation: 4 x 10mm masonry anchors or asphalt spikes

Part No / Description

PSH1500: 1.5m module with fixings - Grey
PSH1500Y: 1.5m module with fixings - Yellow
SMEC: 1 pair end caps

Back to top

Slo-Motion Bridge, wide span speed control system

Slo-Motion Bridge is a modular steel speed control system developed especially for drain crossovers. The long span design and super strong chassis construction mean it can take all types of traffic while bridging damaged or collapsed drains. Spacing modules 10 to 15mm apart allows run off water to access the drain below.

Features

  • 1/2 metre wide modules in black and yellow.
  • Spans up to 600mm wide drains.
  • Independent modules for easy removal.
  • Comes complete with all fixings.
  • Bolts directly to road surface without the need for a rubber underlay to prevent rattling.
  • Eliminates the need to repair damaged drains or collapsed grates.

Specifications

Length: 500mm.
Width: 870mm.
Maximum Span: 600mm.
Height: 75mm.
Top Skin: 6mm floor plate.
No. of Fixings: 4 (supplied).
Weight: 30kgs.

Part No / Description

SMB500: 1/2 metre Heavy Duty Bridge

Back to top

GATOR - one-way speed control system

The GATOR one way speed control system allows access in one direction only thereby preventing wrong way traffic or unauthorised entry or exit. Each one metre module consists of nine independent retracting teeth. When a vehicle approaches from the correct direction the teeth simply retract into the hump allowing free passage. When approached from the unauthorised direction teeth are locked into the upper position, thereby denying access. Each one metre module comes complete with all fixings ready to install moulded rubber End Caps complete the installation. Installation can be carried out simply using a masonry drill and socket wrench.

Features

  • Extremely strong construction 6 mm plate.
  • Highly visible yellow teeth with red speed hump.
  • Controls speed when approached from the correct direction.
  • Denies access from the unauthorised direction.
  • All teeth operate independently of each other.
  • Available in one metre long modules for any situation.
  • Comes complete with all fixings.
  • Concealed fixings remain accessible.
  • Can be used with or without moulded rubber ends.
  • Maintenance free operation.

Awareness Sign Kit P/N SMGKIT

Barrier recommends the installation of our awareness kit to warn vehicle and pedestrian traffic of the GATOR one-way speed control system. Each awareness kit comprises one signpost (2.1 metres high with surface mount base plate), one warning sign, one no entry sign, four signpost brackets and one the proper cap.

Purchasers please note

The GATOR one way speed control system is a security solution for use on private property and should not be installed without checking with your local authorities or controlling bodies. By purchasing this product Barrier Security Products Pty. Ltd..can assume that the purchaser has carried out the necessary checks to ensure the installation is legal and appropriate for your application. Barrier Security Products Pty. Ltd. therefore takes no responsibility for any legal ramifications (damage) caused as a consequence of the purchasers' failing to obtain any necessary approvals 19/05/05.

Specifications

Length: 1 metre.
Width: 350 mm.
Height: 55 mm. teeth down, 115 mm. teeth up
Top Skin: 6mm floor plate.
No. of Fixings: 6 (supplied).
Weight: 26kgs.

Part No / Description

SMG1000: ‘GATOR’ one way speed hump
SMEC: 1 pair End Caps.
SMGKIT: ‘GATOR’ - Awareness sign kit.

Back to top

Lok-Up, parking space protector

Lok-Up is a collapsible steel parking and vehicle access barrier that locks in both the up and down positions. Rugged reinforced steel construction and large footprint ensure maximum strength and durability. The minimum closed height of 35mm opens up to a working height of 750mm. A large reflective sign face and safety yellow powder coated finish provide maximum visibility day or night. Model LU-NP protects your parking spaces by refusing entry to unwanted vehicles. Model LU-NE is used where control of vehicle access to sensitive areas is a problem, such as laneways or parks and gardens, etc.

Features

  • It stands tall when locked up, 750mm tall.
  • It lays low when locked down, 35mm low.
  • Comes complete with padlock and fixings.
  • Large footprint for strong positive mounting.
  • Reflective sign face for night visibility.
  • Strong reinforced steel construction.
  • Available in 2 different models for a wider range of applications.
  • Zinc plated and finished in Safety Yellow powder coat to resist corrosion.
  • Locks in both the up and down positions.
  • We can supply only, OR supply and install.
  • Padlocks can be keyed alike.

Specifications

Description: Lock up/lock down parking and access barrier.
Material: 4mm Mild Steel.
Finish: Zinc plated & Powder coated.
Operating weight: 6 Kgs approx.
Shipping weight: 14 Kgs.
Height down: 35mm.
Height up: 750mm.
Fixing: Masonry anchors (supplied).
Locking: 7mm Shackle laminated padlock (supplied)

Part No / Description

LU-NP: No Parking
LU-NE: No Entry

Back to top

Fold Down Bollard

Our ‘Fold-Down’ bollard model FD150 has been designed for applications such as vehicle access control and parking space protection. In the lay flat position the FD150 is only 80mm high allowing vehicles to drive over it without fouling. In the upright position it stands 800mm high with a broad face of 150mm wide for greater visibility. This broad face also accepts an optional reflective sign face. The class 2 reflective sign face and standard 25mm Red reflective. Available as a surface mount or can be used with an in-ground kit. P/N BGK4 Reflective sign face ordered separately.

Features

  • Stands 800mm tall when locked up
  • Only 80mm high in the lay flat position
  • Available in surface mount or used with in-ground kit.
  • Comes with all fixings and padlock
  • Zinc Plated and finished in High visibility safety yellow powdercoat
  • Broad 150m Face accepts optional reflective sign face
  • Robust fully welded construction
  • Simple operation. Simply unlock and lay flat

Specifications

Description: Fold down access and parking barrier
Material: Mild Steel
Finish: Zinc plated and powdercoated.
Operating weight: 5kg
Shipping weight: 11kg
Height down: 80mm
Height up: 800mm
Fixing: Surface mount 4 of 12 x 60mm Masonry Anchor
Locking: 40mm Padlock (Supplied)
Optional Sign: Class 2 reflective sheeting 120x500mm

Part No / Description

FD150: Fold down bollard 150 x50x800
BGK4: In-ground kit for FD150
FDS1: Reflective sign face

Back to top

Wheel Stops, made from recycled plastic

Suitable in all parking areas to avoid damage to vehicles or property caused by vehicles over-shooting parking bays. These tough wheel stops are manufactured from recycled plastic. They won’t chip or rust, and they come complete with fixings. Available in grey or yellow. They are 1650 mm long and designed to catch the front wheels while still allowing free pedestrian access between parking bays. The low height of 100mm ensures that vehicles with low clearance will not be damaged as they can be with taller concrete wheel stops. Also suitable for use in factories and warehouses to prevent trolleys and forklifts from bumping into walls or offices etc.

These wheel stops comply with the new Australian Standard AS2890.1.2004 which requires wheel stops to be 1650mm long.

Features

  • Can be fixed to concrete or asphalt.
  • Economical and simple to install.
  • Solid moulded construction.
  • Recycled plastic won't chip or corrode.
  • Mounting holes molded in.
  • Low profile reduces the risk of damage to parking vehicles.
  • Can easily be removed or repositioned at any time.
  • Comes complete with fixings.
  • Available in grey or yellow.

Specifications

Description: Recycled plastic wheel stop.
Material: Recycled plastic.
Finish: Solid colour.
Weight: Approx. 7kgs per metre.
Installation: 10x150mm masonry anchors (supplied).

Part No / Description

PWS1650: 1650 mm with fittings - Grey
PWS1650Y: 1650 mm with fittings - Yellow

Back to top

Height Bars

Eliminate damage to vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars. Our Height Bars are available in three standard lengths: 2, 3 or 6 metres and come with suspension chain and hangar assemblies. Powder coated safety yellow with reflective diagonal stripes, they carry the text “LOW CLEARANCE” with the specified height in black letters on a white background. Use high bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction where the clearance in either case is; (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.

Features

  • Available in three convenient lengths.
  • Come complete with hanger assemblies and chain.
  • Powder coated high visibility safety yellow.
  • Has reflective red/white panels.
  • Displays the required clearance (please specify).
  • Manufactured from durable galvanised steel Tube.
  • Designed to comply with AS2890.1-1993.

Specifications

Description: Suspended height bar with hangar ssemblies and chains.
Material: 97 x 42 mm galvanised tube with six millimetre galvanised chain.
Length: 2, 3 or 6 metres.
Chain: 6 mm links. Two lengths, 600 millimetres long
Finish: Safety yellow powder coated over galvanised steel
Weight: 2 metre - 11.0 Kg approx, 3 metre - 15.0 Kg approx, 6 metre - 28.0 Kg approx
Installation: Masonry anchors to building

Part No / Description / Options

HB2: Height Bars with text and hangers 2.0 metres / Special lengths
HB3: Height Bars with text and hangers 3.0 metres / Customer manufacture
HB6: Height Bars with text and hangers 6.0 metres / Custom colours for Height Bar
HBH: Additional hanger with chain assembly

Back to top

Knock Down Bollards

Knock down bollard with an elasticised joint for temporary or permanent delineator applications. Removable bollard post twist locks into base. Post comes with Class 1 reflective bands. Standing 750mm high the bollard is manufactured from fluorescent orange polyethylene. The rubber base is easily installed with epoxy or masonry anchors.

Features

  • Soft , Lightweight bollard takes the knocks without causing damage to vehicles
  • Strong elasticised joint ensures bollard returns to upright position
  • Bollard can be easily removed from base
  • Class 1 reflective band for greater night time visibility

Part No / Description

BSB750: Knock down bollard & base 750mm high

Back to top

Wheel Clamps

Its a fact that the majority of vehicles, boats, caravans and trailers are stolen when in storage or parked outside the home. Wheel clamps help to protect your vehicle or trailer etc against theft by immobilising one wheel. Once fitted the wheel cannot be removed. The bright yellow powdercoated finish adds to the visual deterrent.

Features

  • Easy to fit and user friendly
  • Clear visual as well as physical deterrent
  • Design prevents access to wheel nuts once fitted
  • Range of sizes to fit most vehicles or trailers
  • Fitted to drivers front wheel ensures visibility to anybody approaching your vehicle

Part No / Description

WSCB: Wheel clamp size 165 to 185
WSCC: Wheel clamp size 195 to 205
WSCD: Wheel clamp size 215 to 245
WSCE: Wheel clamp size 265 to 285

Back to top

Indoor Convex Mirrors

An economical new indoor mirror with unbreakable polycarbonate face. Comes complete with wall mounting bracket. Available in three standard sizes.

Features

  • Unbreakable polycarbonate face.
  • Fully adjustable to any angle.
  • Comes with wall mounting bracket.
  • Extends field of view over a broad area

Part No / Description

MC450ID: 450 mm Indoor mirror
MC600ID: 600 mm Indoor mirror
MC800ID: 800 mm Indoor mirror

Back to top

Outdoor Convex Mirrors

An extremely durable weather-proof mirror suitable for road and pedestrian traffic applications, distribution depots and parking areas. Unbreakable polycarbonate face with high visibility orange visor. Comes complete with post-mounting bracket. Optional wall mount bracket is also available.

Features

  • Bright orange fibreglass body.
  • Comes complete with post-mounting bracket.
  • Fully adjustable to any angle.
  • Wall mount brackets available.

Part No / Description

MC600OD: 600 mm Outdoor mirror
MC800ID: 800 mm Outdoor mirror
MC1000OD: 1000 mm Outdoor mirror
MCB60: Wall mount bracket for MC600OD
MCB75: Wall mount bracket for MC800OD & MC1000OD

Back to top